We have 6 of these left, then we are done. 15% retail price.

This item is an oversized item and shipping charges will apply.

We have the updated version of this manifold. We have replaved the 90 degree bend where the turbo bolts up with a cast staniless 90 degree v-band.

We are proud to sell Action Speed Shop LS Single Turbo Manifold is designed with a v-band rear dump for the cross over. Flanges are laser cut from grade-70 high carbon 1/2" thick steel. Back purge Tig welded from schedule 40 3/16 thick 304 stainless tubing. Front mount T4 turbo flange. Manifold has drivers side O2 bung welded in. Head flange is hand ported to 1 7/8". This manifold will not clear factory A/C boxes on the firewall. Waste gate position allows clearance for a 4" outlet from turbo. Waste gate flange is designed to be used with a 46MM V-band 1.75" OD diameter tubing.

Our exhaust cross over kit that fits our LS1 single turbo exhaust manifold is Tig welded from 2 1/2 mild steel mandrel bent tubing. V-band clamps at each end, from turbo manifold to other side of engine. Includes separate piece that has a V-band clamp from the cross over and a flange that matches your selected drivers side exhaust manifold. Includes an aluminum gasket that matches the drivers exhaust manifold.

Picture of turbo kit installed in a car is a 71 Nova using our Solid Adjustable Muscle Mounts. 68MM T4 turbo- hood closes.

* Oil dipstick tube will need to be slightly bent.

* LS1, LS2, LS3, 4.8, 5.3, 5.7, 6.0, 6.2 

* Requires relocating coil packs and longer spark plug wires on passenger side of engine.