“Ford Upgrade” Fox Body LS1 swap conversion mounts. These billet aluminum adjustable mounts allow you to install late the model GM Gen III and Gen IV LS engines 1997-2013 into the 1979-93 Mustang using the stock front V8 K member. No cutting or fabrication required.  These conversion mounts allow 1 ½ inches of adjustment. Machined from 3/8 thick 6061-T6 billet aluminum. These are designed to be used with 1996-2004 Mustang 4.6 engine mounts, not included with conversion mounts. All grade-8 zinc coated hardware included.

INSTALLATION INSTRUCTIONS

* Aftermarket transmission cross member required.

* LS Cadillac CTSV oil pan is required to clear the K member. Holley 302-1 is more low profile.  F Body pan would require notching the K member. 

* Will not clear low mount A/C compressors.

* These mounts will clear low mount drivers side alternators, rear brace removed.

* All aftermarket LS Mustang headers designed to fit the factory K member will clear.

* Clears correctly with Duralast 3001 & 3002 factory replacemnt mounts.