Precision CNC laser cut and CNC folded from .250 cold roll plate steel. These Patented Design engine mounts are for installing the 1997-2013 Gen III/IV LS series engine into any street rod or hot rod frame configuration. They are slotted for front to back adjustment with engine placement in the engine compartment. Most engine mounts only allow you to position the engine in one location, not allowing you to change transmissions in the future without major reconstruction of the transmission cross member. Our mounts will allow you to move the engine forward or rearward with up to 3 inches of travel. 

These are offered as just the engine mounts, or a complete engine mount package. The isolators in the mount package are hyper-flex polyurethane. Designed with adjustable holes in the engine mounts and the frame mounts. The frame side mount can be trimmed up to an inch per side allowing these to fit chassis from 19.125" to 26.75" inside frame width.

* Welded and cooled in a jig to retain precision alignment.

* Sold as a pair, grade-8 hardware included.

* (raw steel not painted) Black texture powder coat is available.

* These mounts will not clear low mount a/c. They will clear low mount alternator but the amount of adjustment is limited.

Featured in GM High-Tech Performance, Chevy High Performance, Street Rodder, and Super Chevy Magazines.

Also fits-

• Jeep CJ10 (81-85)
• Jeep CJ5 (72-86)
• Jeep CJ6 (72-75)
• Jeep CJ7 (76-86)
• Jeep CJ8 (81-86)
• Jeep Grand Wagoneer (72-84)
• Jeep J series Truck (81-85)
• Jeep SJ Cherokee (72-84)
• Jeep Wagoneer (72-84)
• Jeep Willys Wagon (46-65)
• Jeep YJ (87-95)
• Toyota Land Cruiser FJ40 (63-84)
• Toyota Land Cruiser FJ55 (67-80)
• Toyota Land Cruiser FJ60 (81-87)
• Toyota Land Cruiser FJ62 (88-90)